lynxrc [Texto-Plano]

Esta página es de solo lectura. Puedes ver la fuente pero no puedes cambiarla. Pregunta a tu administrador si crees que esto es incorrecto.
<code bash>
# Fichero de configuración de usuario por defecto del navegador Lynx
# 
# Este fichero contiene las opciones guardadas a través de la pantalla Options
# de Lynx (normalmente con la tecla 'o'). Para guardar las opciones en dicha pantalla,
# debe activar la opción seleccionable:
#	Save options to disk
#
# Luego deberás guardar las opciones utilizando en enlace por encima de la
# opción seleccionable:
#	Accept Changes
#
# Podrías también querer utilizar la opción de línea de comandos "-forms_options",
# la cual presenta en su lugar un menú Options simplificado.  Guarda las opciones
# en dicho menú utilizando la tecla '>'.
# 
# There is normally no need to edit this file manually, since the defaults
# here can be controlled from the Options Screen, and the next time options
# are saved from the Options Screen this file will be completely rewritten.
# You have been warned...
# 
# If you are looking for the general configuration file - it is normally
# called "lynx.cfg".  It has different content and a different format.
# It is not this file.

# accept_all_cookies permite al usuario decirle a Lynx que automáticamente
# acepte todas las cookies si esto lo desea.  Por defecto está en "FALSE" 
# lo cual preguntará por cada cookie individual. Configura accept_all_cookies
# en "TRUE" para aceptar todas las cookies.
accept_all_cookies=off

# anonftp_password allows the user to tell Lynx to use the personal
# email address as the password for anonymous ftp.  If no value is given,
# Lynx will use the personal email address.  Set anonftp_password
# to a different value if you choose.
anonftp_password=

# El fichero bookmark_file especifica el nombre y localización de los marcadores
# (favoritos) que puedes usar para regresar a un sitio fácilmente.
bookmark_file=.lynx_bookmarks.html

# If case_sensitive_searching is "on" then when the user invokes a search
# using the 's' or '/' keys, the search performed will be case sensitive
# instead of case INsensitive.  The default is usually "off".
case_sensitive_searching=off

# La definición character_set controla la representación de los caracteres
# de 8 bits en la terminal. Si los caracteres de 8 bits no aparecen
# correctamente en pantalla, puede intentar cambiar a un conjunto de
# 8 bits diferente, o emplear las aproximaciones de 7 bits.
# Los conjuntos de caracteres válidos actuales son:
#    Western (ISO-8859-1)
#    7 bit approximations (US-ASCII)
#    Western (ISO-8859-15)
#    Western (cp850)
#    Western (windows-1252)
#    IBM PC US codepage (cp437)
#    DEC Multinational
#    Macintosh (8 bit)
#    NeXT character set
#    HP Roman8
#    Chinese
#    Japanese (EUC-JP)
#    Japanese (Shift_JIS)
#    Korean
#    Taipei (Big5)
#    Vietnamese (VISCII)
#    Transparent
#    Eastern European (ISO-8859-2)
#    Eastern European (cp852)
#    Eastern European (windows-1250)
#    Latin 3 (ISO-8859-3)
#    Latin 4 (ISO-8859-4)
#    Baltic Rim (ISO-8859-13)
#    Baltic Rim (cp775)
#    Baltic Rim (windows-1257)
#    Cyrillic (ISO-8859-5)
#    Cyrillic (cp866)
#    Cyrillic (windows-1251)
#    Cyrillic (KOI8-R)
#    Arabic (ISO-8859-6)
#    Arabic (cp864)
#    Arabic (windows-1256)
#    Celtic (ISO-8859-14)
#    Greek (ISO-8859-7)
#    Greek (cp737)
#    Greek2 (cp869)
#    Greek (windows-1253)
#    Hebrew (ISO-8859-8)
#    Hebrew (cp862)
#    Hebrew (windows-1255)
#    Turkish (ISO-8859-9)
#    Turkish (cp857)
#    North European (ISO-8859-10)
#    UNICODE (UTF-8)
#    RFC 1345 w/o Intro
#    RFC 1345 Mnemonic
#    Ukrainian Cyrillic (cp866u)
#    Ukrainian Cyrillic (KOI8-U)
#    Cyrillic-Asian (PT154)
character_set=UNICODE (UTF-8)

# cookie_accept_domains y cookie_reject_domains es un listado delimitado
# por comas de dominios desde los cuales Lynx aceptará o rechazará
# automáticamente las cookies. Si se especifican un dominio en ambas
# opciones, el rechazo tendrá precedencia. El parámetro accept_all_cookies
# sobrepasará cualquier opción aquí realizada.
cookie_accept_domains=

# cookie_file espeficia el fichero desde donde leer cookies persistentes.
# Por defecto es ~/.lynx_cookies.
cookie_file=

# cookie_loose_invalid_domains, cookie_strict_invalid_domains, and
# cookie_query_invalid_domains are comma-delimited lists of which domains
# should be subjected to varying degrees of validity checking.  If a
# domain is set to strict checking, strict conformance to RFC2109 will
# be applied.  A domain with loose checking will be allowed to set cookies
# with an invalid path or domain attribute.  All domains will default to
# querying the user for an invalid path or domain.
cookie_loose_invalid_domains=

cookie_query_invalid_domains=

cookie_reject_domains=

cookie_strict_invalid_domains=

# Si emacs_keys se pone en "on" se usarán las teclas de movimiento
# normal de EMACS:
#   ^N = abajo     ^P = arriba
#   ^B = izquierda ^F = derecha
emacs_keys=off

# file_editor especifica el editor a invocar durante la edición de ficheros
# locales o envío de correo electrónico. Si no se especifica editor, la
# edición de ficheros será desactivada a no ser que se active desde la
# línea de comandos, y se utilizará el editor de líneas incorporado para
# enviar mail.
file_editor=nano

# The file_sorting_method specifies which value to sort on when viewing
# file lists such as FTP directories.  The options are:
#    BY_FILENAME -- sorts on the name of the file
#    BY_TYPE     -- sorts on the type of the file
#    BY_SIZE     -- sorts on the size of the file
#    BY_DATE     -- sorts on the date of the file
file_sorting_method=BY_FILENAME

# If keypad_mode is set to "NUMBERS_AS_ARROWS", then the numbers on
# your keypad when the numlock is on will act as arrow keys:
#             8 = Up Arrow
#   4 = Left Arrow    6 = Right Arrow
#             2 = Down Arrow
# and the corresponding keyboard numbers will act as arrow keys,
# regardless of whether numlock is on.
# If keypad_mode is set to "LINKS_ARE_NUMBERED", then numbers will
# appear next to each link and numbers are used to select links.
# If keypad_mode is set to "LINKS_AND_FORM_FIELDS_ARE_NUMBERED", then
# numbers will appear next to each link and visible form input field.
# Numbers are used to select links, or to move the "current link" to a
# form input field or button.  In addition, options in popup menus are
# indexed so that the user may type an option number to select an option in
# a popup menu, even if the option isn't visible on the screen.  Reference
# lists and output from the list command also enumerate form inputs.
# NOTE: Some fixed format documents may look disfigured when
# "LINKS_ARE_NUMBERED" or "LINKS_AND_FORM_FIELDS_ARE_NUMBERED" are
# enabled.
keypad_mode=LINKS_ARE_NOT_NUMBERED

# lineedit_mode specifies the key binding used for inputting strings in
# prompts and forms.  If lineedit_mode is set to "Default Binding" then
# the following control characters are used for moving and deleting:
# 
#              Prev  Next       Enter = Accept input
#    Move char: <-    ->        ^G    = Cancel input
#    Move word: ^P    ^N        ^U    = Erase line
#  Delete char: ^H    ^R        ^A    = Beginning of line
#  Delete word: ^B    ^F        ^E    = End of line
# 
# Current lineedit modes are:
#    Default Binding
#    Alternate Bindings
#    Bash-like Bindings
lineedit_mode=Default Binding

# Lo siguiente permite definir ficheros de sub-marcadores y descripciones.
# El formato es mullti_bookmark<letra_mayúscula>=<fichero>,<descripción>
# Se permiten hasta 26 ficheros de marcadores (para las letras 
# mayúsculas inglesas).
# Comenzaremos con "multi_bookmarkB" ya que la 'A' es la opc por defecto
# (veer arriba).
multi_bookmarkB=
multi_bookmarkC=
multi_bookmarkD=
multi_bookmarkE=
multi_bookmarkF=
multi_bookmarkG=
multi_bookmarkH=
multi_bookmarkI=
multi_bookmarkJ=
multi_bookmarkK=
multi_bookmarkL=
multi_bookmarkM=
multi_bookmarkN=
multi_bookmarkO=
multi_bookmarkP=
multi_bookmarkQ=
multi_bookmarkR=
multi_bookmarkS=
multi_bookmarkT=
multi_bookmarkU=
multi_bookmarkV=
multi_bookmarkW=
multi_bookmarkX=
multi_bookmarkY=
multi_bookmarkZ=

# personal_mail_address especifica su dirección de correo personal.
# La dirección será enviada durante la transferencia de ficheros HTTP
# con propósito de autorización y alta de sesión, y para el envío
# por correo de documentos.
# Si no desea dar esta información, configura NO_FROM_HEADER a TRUE
# en lynx.cfg, o usa la opción -nofrom en la línea de comandos.  También
# puedes dejar esto en blanco, y no lo tendrás incluido en tus comentarios
# enviados.
personal_mail_address=

# personal_mail_name specifies your personal name, for mail.  The
# name is sent for mailed comments.  Lynx will prompt for this,
# showing the configured value as a default when sending mail.
# This is not necessarily the same as a name provided as part of the
# personal_mail_address.
# Lynx does not save your changes to that default value as a side-effect
# of sending email.  To update the default value, you must use the options
# menu, or modify this file directly.
personal_mail_name=

# preferred_charset especifica el conjunto de caracteres para la notación
# MIME (ej., ISO-8859-2, ISO-8859-5) la cual Lynx indicará como preferida
# para las respuestas que le realicen los servidores http que emplean el
# encabezado Accept-Charset header.  El valor NO DEBE ser ISO-8859-1 ni
# US-ASCII, ya que estos son los valores asumidos por defecto. Puede ser
# una lista separada por comas.
# Si un fichero de tal conjunto de caracteres se encuentra disponible, será
# enviado por el servidor. Si no existe encabezado Accept-Charset alguno,
# se aceptará cualquier conjunto de caracteres. Si existe un encabezado
# Accept-Charset, y si el servidor no puede enviar una respuesta aceptable
# de acuerdo al encabezado Accept-Charset, el servidor DEBE enviar una
# respuesta de error, aunque el envío de una respuesta inaceptable también
# resulta permitido.
preferred_charset=

# preferred_language specifies the language in MIME notation (e.g., en,
# fr, may be a comma-separated list in decreasing preference)
# which Lynx will indicate you prefer in requests to http servers.
# If a file in that language is available, the server will send it.
# Otherwise, the server will send the file in its default language.
preferred_language=es,en

# select_popups specifies whether the OPTIONs in a SELECT block which
# lacks a MULTIPLE attribute are presented as a vertical list of radio
# buttons or via a popup menu.  Note that if the MULTIPLE attribute is
# present in the SELECT start tag, Lynx always will create a vertical list
# of checkboxes for the OPTIONs.  A value of "on" will set popup menus
# as the default while a value of "off" will set use of radio boxes.
# The default can be overridden via the -popup command line toggle.
select_popups=on

# show_color specifies how to set the color mode at startup.  A value of
# "never" will force color mode off (treat the terminal as monochrome)
# at startup even if the terminal appears to be color capable.  A value of
# "always" will force color mode on even if the terminal appears to be
# monochrome, if this is supported by the library used to build lynx.
# A value of "default" will yield the behavior of assuming
# a monochrome terminal unless color capability is inferred at startup
# based on the terminal type, or the -color command line switch is used, or
# the COLORTERM environment variable is set.  The default behavior always is
# used in anonymous accounts or if the "option_save" restriction is set.
# The effect of the saved value can be overridden via
# the -color and -nocolor command line switches.
# The mode set at startup can be changed via the "show color" option in
# the 'o'ptions menu.  If the option settings are saved, the "on" and
# "off" "show color" settings will be treated as "default".
show_color=default

# show_cursor specifies whether to 'hide' the cursor to the right (and
# bottom, if possible) of the screen, or to place it to the left of the
# current link in documents, or current option in select popup windows.
# Positioning the cursor to the left of the current link or option is
# helpful for speech or braille interfaces, and when the terminal is
# one which does not distinguish the current link based on highlighting
# or color.  A value of "on" will set positioning to the left as the
# default while a value of "off" will set 'hiding' of the cursor.
# The default can be overridden via the -show_cursor command line toggle.
show_cursor=off

# show_dotfiles specifies that the directory listing should include
# "hidden" (dot) files/directories.  If set "on", this will be
# honored only if enabled via userdefs.h and/or lynx.cfg, and not
# restricted via a command line switch.  If display of hidden files
# is disabled, creation of such files via Lynx also is disabled.
show_dotfiles=off

# If sub_bookmarks is not turned "off", and multiple bookmarks have
# been defined (see below), then all bookmark operations will first
# prompt the user to select an active sub-bookmark file.  If the default
# Lynx bookmark_file is defined (see above), it will be used as the
# default selection.  When this option is set to "advanced", and the
# user mode is advanced, the 'v'iew bookmark command will invoke a
# statusline prompt instead of the menu seen in novice and intermediate
# user modes.  When this option is set to "standard", the menu will be
# presented regardless of user mode.
sub_bookmarks=OFF

# user_mode specifies the users level of knowledge with Lynx.  The
# default is "NOVICE" which displays two extra lines of help at the
# bottom of the screen to aid the user in learning the basic Lynx
# commands.  Set user_mode to "INTERMEDIATE" to turn off the extra info.
# Use "ADVANCED" to see the URL of the currently selected link at the
# bottom of the screen.
user_mode=NOVICE

# If verbose_images is "on", lynx will print the name of the image
# source file in place of [INLINE], [LINK] or [IMAGE]
# See also VERBOSE_IMAGES in lynx.cfg
verbose_images=on

# If vi_keys is set to "on", then the normal VI movement keys:
#   j = down    k = up
#   h = left    l = right
# will be enabled.  These keys are only lower case.
# Capital 'H', 'J' and 'K will still activate help, jump shortcuts,
# and the keymap display, respectively.
vi_keys=off

# The visited_links setting controls how Lynx organizes the information
# in the Visited Links Page.
visited_links=LAST_REVERSED
</code>